2-1/16”- 7-1/16”2000-20000Psi Pneumatic Gate Valves Superior Sealing Performance
Pneumatic Gate Valves
Size: 2-1/16” to 7-1/16”
Pressure Rating: 2000-20000Psi
Temperature: -20°F ~ 250°F
Design: API 6A
End Connection: Flanged RF Ends/RTJ Ends/Threaded Ends/Union Ends/Welded Ends
Pressure Rating: 2000-20000Psi
Temperature: -20°F ~ 250°F
Design: API 6A
End Connection: Flanged RF Ends/RTJ Ends/Threaded Ends/Union Ends/Welded Ends
Quantity
Product Overview:
ATHENA pneumatic gate valve
- Pneumatic Actuator installed on the top of the bonnet which controls the open and close of the valve by pneumatic pressure.
- Metal Seal between the Body and Bonnet.Backseat seal between the stem and the bonnet, easy for the change of sealing stuff under pressure.
- Sealing surface is hard-faced or the QBQ with the performance of anti-corrosion, wear-resistance.
- Low operating Torque
- Working principle of pneumatic gate valve:
When using the air source to operate the gate valve, the small handle of the manual device must be turned to the pneumatic position to open and close the nut and the screw rod. When the compressed air enters from the upper pipeline of the cylinder, the piston and the piston rod in the cylinder are pushed straight When the compressed air enters from the lower pipe, the gas pushes the piston and piston rod in the cylinder to move upwards, and at the same time drives the valve stem to move upwards to open the valve. When there is no air source, the screw rod and the opening and closing nut can be used to open and close the valve.
ATHENA pneumatic gate valve
- Pneumatic Actuator installed on the top of the bonnet which controls the open and close of the valve by pneumatic pressure.
- Metal Seal between the Body and Bonnet.Backseat seal between the stem and the bonnet, easy for the change of sealing stuff under pressure.
- Sealing surface is hard-faced or the QBQ with the performance of anti-corrosion, wear-resistance.
- Low operating Torque
- Working principle of pneumatic gate valve:
When using the air source to operate the gate valve, the small handle of the manual device must be turned to the pneumatic position to open and close the nut and the screw rod. When the compressed air enters from the upper pipeline of the cylinder, the piston and the piston rod in the cylinder are pushed straight When the compressed air enters from the lower pipe, the gas pushes the piston and piston rod in the cylinder to move upwards, and at the same time drives the valve stem to move upwards to open the valve. When there is no air source, the screw rod and the opening and closing nut can be used to open and close the valve.
Athena pneumatic gate valve uses a pneumatic actuator instead of a handwheel. By utilizing compressed air, the actuator can spin the stem to raise or lower the gate. This allows it to be operated remotely with no user on-site but requires a pneumatic system on site.
Partial List of Applications:
- Oil & Gas Pipelines
- Refineries and Petrochemical Plants
- Power Generation
- Gas and Coal Fired Turbines
- District Heating
- Gas Measurement Systems
- Offshore Platforms
- HIPPS Systems
- Cryogenic Service Applications
- Emergency Shut Down Valves
- Pulp & Paper
- Mining
- Boiler Steam and Drain Applications